Holco Forum
September 06, 2010, 09:02:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please be advised this forum is being retired.  It is being replaced by the new Holco Blog.  This forum will continue to exist, but will not be maintained or updated.  The blog will make it easier for users to keep updated using the RSS feed.  It will also make it easier for us to add content more frequently!  Check it out!
 
   Home   Help Search Login Register  
Holco Forum > Software > QC-Calc > Different users, same PC
Pages: [1]
« previous next »
  Send this topic  |  Print  
Author Topic: Different users, same PC  (Read 1309 times)
mgattvi
Newbie
*
Offline Offline

Posts: 12
« on: May 27, 2008, 12:14:22 PM »
We have QC CALC set up for one user on a PC. 
Now that the routines are written, we are training another user. 
Each user will have their own profile on the PC. 
Running measuremind from the new user profile is not a problem, but QC CALC will not open. 
The new user is not restricted in any Windows way.
When trying to open QC CALC, the error message is:

Read/Write access to the following location(s) is required to run this software.

C:\Prolink\QC CALC 3.0\Misc Files\


Any Ideas?
Logged
John Lankford
Holco Service Manager
Global Moderator
Full Member
*****
Offline Offline

Posts: 102



WWW Email
« Reply #1 on: May 27, 2008, 12:26:41 PM »
See the attached document.....
Logged
mgattvi
Newbie
*
Offline Offline

Posts: 12
« Reply #2 on: May 27, 2008, 01:23:25 PM »
Thanks.  That did it.
Logged
Pages: [1]
  Send this topic  |  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC Valid XHTML 1.0! Valid CSS!